NXP Semiconductors
PESD5V0S1ULD
Unidirectional ESD protection diode
7. Application information
The PESD5V0S1ULD is designed for the protection of one unidirectional data or signal
line from the damage caused by ESD and surge pulses. The device may be used on lines
where the signal polarities are either positive or negative with respect to ground. The
PESD5V0S1ULD provides a surge capability of 150 W per line for an 8/20 μ s waveform.
line to be protected
(positive signal polarity)
PESD5V0S1ULD
GND
line to be protected
(negative signal polarity)
PESD5V0S1ULD
GND
unidirectional protection of one line
006aac487
Fig 10. Application diagram
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)
and surge transients. The following guidelines are recommended:
1. Place the device as close to the input terminal or connector as possible.
2. The path length between the device and the protected line should be minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and
ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use ground
vias.
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors , and is
suitable for use in automotive applications.
PESD5V0S1ULD
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 19 October 2010
? NXP B.V. 2010. All rights reserved.
7 of 12
相关PDF资料
PESD5V0S2BT,215 DIODE BIDIR ESD PROTECT SOT23
PESD5V0S2UAT,215 DIODE DBL ESD PROTECTION SOT23
PESD5V0S4UD,115 DIODE ARRAY ESD 5V 6-TSOP
PESD5V0S4UF,115 DIODE QUAD ESD PROTECTION 6XSON
PESD5V0S5UD,115 DIODE ARRAY ESD 5V 6-TSOP
PESD5V0U1BB,115 DIODE ULOW ESD PROTECTION SOD523
PESD5V0U1BLD,315 DIODE ESD PROECT ULOW SOD-882
PESD5V0U1UA,115 DIODE ESD PROT UNI 5V SOD323-2
相关代理商/技术参数
PESD5V0S1USF,315 功能描述:DIODE ESD PROTECTION SOD962 RoHS:是 类别:未定义的类别 >> 其它 系列:* 标准包装:1 系列:* 其它名称:MS305720A
PESD5V0S1USF315 制造商:Rochester Electronics LLC 功能描述: 制造商:NXP 功能描述: 制造商:NXP Semiconductors 功能描述:
PESD5V0S2BQAZ 功能描述:TVS DIODE 5VWM 11.5VC DFN1010D-3 制造商:nexperia usa inc. 系列:汽车级,AEC-Q101 包装:剪切带(CT) 零件状态:在售 类型:齐纳 双向通道:2 电压 - 反向关态(典型值):5V(最大) 电压 - 击穿(最小值):5.5V 电压 - 箝位(最大值)@ Ipp:11.5V 电流 - 峰值脉冲(10/1000μs):17.5A(8/20μs) 功率 - 峰值脉冲:- 电源线路保护:无 应用:汽车级 不同频率时的电容:35pF @ 1MHz 工作温度:-55°C ~ 125°C(TA) 安装类型:表面贴装 封装/外壳:3-XDFN 裸露焊盘 供应商器件封装:DFN1010D-3 标准包装:1
PESD5V0S2BT 制造商:NXP Semiconductors 功能描述:DIODE TVS DUAL SOT-23 制造商:NXP Semiconductors 功能描述:DIODE, TVS, DUAL, SOT-23 制造商:NXP Semiconductors 功能描述:DIODE, TVS, DUAL, SOT-23; TVS Polarity:Bidirectional; Reverse Stand-Off Voltage Vrwm:5V; Breakdown Voltage Min:5.5V; Breakdown Voltage Max:9.5V; Clamping Voltage Vc Max:14V; Peak Pulse Current Ippm:12A; Diode Case Style:SOT-23; No. ;RoHS Compliant: Yes
PESD5V0S2BT T/R 制造商:NXP Semiconductors 功能描述:ESD Suppressor TVS 30KV 3-Pin TO-236AB T/R
PESD5V0S2BT,215 功能描述:TVS二极管阵列 5V BIDIRECTION ESD DUAL RoHS:否 制造商:Littelfuse 极性: 通道:4 Channels 击穿电压: 钳位电压:11.5 V 工作电压:2.5 V 峰值浪涌电流:20 A 安装风格:SMD/SMT 端接类型:SMD/SMT 系列: 最小工作温度:- 40 C 最大工作温度:+ 85 C
PESD5V0S2BT215 制造商:NXP Semiconductors 功能描述:ESD DIODE 14V Bidirectional SOT-23
PESD5V0S2UAT 制造商:NXP Semiconductors 功能描述:DIODE TVS DUAL SOT-23 制造商:NXP Semiconductors 功能描述:DIODE, TVS, DUAL, SOT-23 制造商:NXP Semiconductors 功能描述:DIODE, TVS, DUAL, SOT-23; TVS Polarity:Unidirectional; Reverse Stand-Off Voltage Vrwm:5V; Breakdown Voltage Min:6.4V; Breakdown Voltage Max:7.2V; Clamping Voltage Vc Max:6.8V; Peak Pulse Current Ippm:15A; Diode Case Style:SOT-23; No.;RoHS Compliant: Yes 制造商:NXP Semiconductors 功能描述:UniDirect ESD protect diode,PESD5V0S2UAT